Use of augmented reality technology at the stages of the life cycle of a capital construction facility

Introduction. The application of information modelling (BIM) and augmented reality (AR) technologies at the stage of construction and subsequent operation of capital construction facilities (CCF) is analyzed.

Materials and methods. Potential possibilities of optimization of work of installation and construction teams or carrying out of project expertise using information modelling (BIM) technologies are shown. Due to the application of this technology: the terms of installation works at the construction site are reduced (as a result, costs are reduced and labour efficiency is increased); the terms of the project expertise are reduced (at the stage of construction object commissioning). The main idea is to combine BIM technology at the construction stage and augmented reality technology. Combination of these technologies will make it easier to identify deviations from the project and reduce the labour intensity of installation works.

Results. The proposed information tables for visualization of elements of the information model of the construction object and the key principles of their filling with data on the example of a pipeline on the basis of given points of the constructed three-dimensional model are of great importance for the construction practice. Examples of AR application at the operation stage on the example of a water meter and an electric meter are considered.

Conclusions. Types and content of information visualization tables of the main pipeline are formulated and determined on the basis of which the construction of a three-dimensional model of the pipeline at the construction stage of the facility is carried out. An example of the content of the information table of visualization of individual elements of the information model of the construction object at the operational stage is given on the example of a water and electric meter. The directions of further research are given.

1. Sosnilo A.I., Ustyuzhanina M.D. Technology of virtual and augmented reality as factors of state economic policy and business competitiveness growth. PNRPU Sociology and Economics Bulletin. 2019; 2:204-219. DOI: 10.15593/2224-9354/2019.2.15. EDN VNPEVC. (rus.).

2. Izosina E.V., Semerkova L.N. Strategic appeal evaluation of the virtual and augmented reality market in Russia. University proceedings. Volga region. Social sciences. 2017; 3(43):193-202. DOI: 10.21685/2072-3016-2017-3-21. EDN YTMWEZ. (rus.).

3. Ivanova A.V. VR & AR technologies: opportunities and application obstacles. Strategic decisions and risk management. 2018; 3:88-107. DOI: 10.17747/2078-8886-2018-3-88-107 (rus.).

4. Kuchmieva D.A. Prospects of Russian it companies in the world market of VR and AR technologies. Herald of Science and Education. 2019; 12-1(66):73-76. EDN JAXWWM. (rus.).

5. Kuznetsov V., Russu Ju., Kupriyanovsky V. On the use of virtual and augmented reality. International Journal of Open Information Technologies. 2019; 7(4):75-84. EDN YOFXAO. (rus.).

6. Yakovlev B.S., Pustov S.I. Classification and promising application augmented reality. Izvestiya Tula State University. 2013; 3:484-492. EDN QCGFJL. (rus.).

7. Yakovlev B.S., Pustov S.I. History, features and prospects of augmented reality. Izvestiya Tula State University. 2013; 3:479-484. EDN MWPJML. (rus.).

8. Filimonenkova T.N. Augmented reality as an innovative technology of the educational process. Problems of Modern Pedagogical Education. 2018; 58-1:246-251. (rus.).

9. Shevchenko G.I., Kochin D.A. The main characteristics of VR glasses and the prospects of their use in the educational process. Teacher of the XXI century. 2018; 4-1:160-168. (rus.).

10. Kravchenko Yu.A., Lezhebokov A.A., Pashenko S.V. Features of using augmented reality technology to support educational processes. Open Education. 2014; 3(104):49-54. DOI: 10.21686/1818-4243-2014-3(104-49-54 (rus.).

11. Kolesnikov A.A., Kikin P.M., Komissarova E.V. Creation of a virtual models of terrain and buildings. Interexpo Geo-Siberia. 2016; 7:45-49. EDN VVZYSZ. (rus.).

12. Kuznechenkov E.Yu. AR as a new level of quality of work in the construction sector. Synergy Journal. 2019; 31:608-614. EDN YWDECD. (rus.).

13. Knyazeva L.L., Fedorov O.P. AR as a means of communication in architectural design. Synergy Journal. 2019; 31:764-774. EDN YWDEGL. (rus.).

14. Obvinceva E.O., Ryazanov I.Yu., Shavva A.A. AR in design and construction. Synergy Journal. 2019; 31:638-644. (rus.).

15. Simchenko O.L., Suncov A.S., Chazov E.A., Kudelina A.A., Malysheva E.N. Problems and prospects of using VR and AR technologies in construction. Fundamental and applied science: The state and trend of development : collection of articles of the III International Scientific and Practical Conference. 2020; 91-98. EDN FMTULT. (rus.).

16. Shilov L., Evtushenko S., Arkhipov D., Shilova L. The prospects of information technology using for the analysis of industrial buildings defects. IOP Conference Series: Materials Science and Engineering. 2021; 1030(1):012039. DOI: 10.1088/1757-899X/1030/1/012039

17. Evtushenko S.I., Shilova L.A., Ulesikova E.S., Kuchumov M.A. Information modeling of a subway tunnel with anti-vibration measures. Science and Business: Ways of Development. 2019; 10(100):29-35. EDN KAKHFS. (rus.).

18. Shutova M., Varenitsa A., Evtushenko S., Podskrebalin A. Application of the 3D scanning method when performing measurement works of industrial and non- industrial objects. Construction and Architecture. 2022; 10(2):76-80. DOI: 10.29039/2308-0191-2022-10-2-76-80. EDN NYAEVM. (rus.).

19. Evtushenko S., Puchenkov I. Creating a building information model in a shared data environment. Construction and Architecture. 2021; 9(1):46-50. DOI: 10.29039/2308-0191-2021-9-1-46-50. EDN PBMPCM. (rus.).

20. Fetter M., Evtushenko S. Problems of application of automatic arrangement of elements in the construction of an information model of pipeline systems of a building based on point clouds. Construction and Architecture. 2022; 10(2):71-75. DOI: 10.29039/2308-0191-2022-10-2-71-75. EDN NVEZMF. (rus.).

21. Ostashev R., Evtushenko S. Development of IFC mapping for export of information models of architectural solutions. Construction and Architecture. 2022; 10(2):91-110. DOI: 10.29039/2308-0191-2022-10-2-91-110. EDN YADGFT. (rus.).

22. Ostaschev R.V., Evtushenko S.I. Analysis of the plugin for communication of building information models direct link. Information technologies in the survey of operated buildings and structures : materials of the XIX International Scientific and Technical conf. 2020; 9-13. EDN NLOBBJ. (rus.).

23. Shabalin M.S., Nazarov E.S., Yakubovich A.M., Losev K.Yu. The possibilities of using AR and VR in the life cycle of a building in Russia. System engineering of construction. Cyberphysical building systems – 2019 : collection of materials of the All-Russian Scientific Conference 2019; 563-566. EDN BJIVZG. (rus.).

24. Lujev A.Yu. Laser scanning for BIM and visualization results in a VR environment. Student Science Days : collection of reports of the scientific and technical conference. 2020; 499-503. EDN IPDEBH. (rus.).

25. Shabalin M.S., Bashirova Yu.R. Comparative analysis of programs using AR technology in relation to construction and architecture objects. Student Science Days : collection of reports of the scientific and technical conference. 2020; 441-444. EDN JDSPCS. (rus.).

26. Sinyagina K.A., Rybakova A.O. Application of AR technology in individual construction. Student Science Days : collection of reports of the scientific and technical conference. 2022; 219-224. EDN JYMQLO. (rus.).

27. Jeleznova A.O. Implementation of VR technologies based on the capabilities of AutoDesk Revit and A360 Rendering. Student Science Days : collection of reports of the scientific and technical conference. 2022; 246-249. EDN FILXSK. (rus.).